Skip to main content

First steps. Syma X12S

As I commented in previous post, my first contact with quadcopters was accidentally. In Kings Day I received a very little toy, Syma X12S, as a gift. It was the beginning and my first steps in the hobby.


Some time later, after get considerable experience and many more flights done, I must say you I began with one of most recommendable quadcopter to begin with, maybe the best. It’s obviously a quadcopter to fly inside because of his size, but I am also sure that it’s the best way to begin, flying inside. Why? You would flight in a “very controlled area” and always with a close view of the quad.

Obviously, you will be crashing time after time, but these accidents will be not so severe for the little toy as in outside location would be.

Currently it’s very common to find a large list of microquads close to this Syma X12S, and I pretty sure that so much of these are very good to flight, but I am talking about my experience. Trust me if I tell you that choose this quad will be a sure buy. Furthermore, during the writing of this post, X12S could be found around 12 to 25$.

Features

Taking into account Syma is a basic quad, I would say it doesn't have very special skills but do what it must to do great.

I like

Size. very tiny drone but also very handable. 

Strength. Relatively strong against typical impacts.

Stability. Very stable in flight so it's quite easy to control.

Flight modes. You could change between three different flight modes from slowest to fastest. I recommend the slowest one to flight especially if you are beginner.

In the air. Easy two know the quad position. There are two lights in the front (red) and two more in the rear (green), very helpful to know where the front is.

TX. RC transmitter is very ergonomic and bigger than the one included in the other quads of these category.

Spare parts. Easy to find and cheap. Also easy to repair.


I don´t like

Durability. As in almost all cheap quads, the drone parts are not durable, but is so easy to find spare parts.
Batteries could seem to be not available but it’s easy to solve. Syma X12S uses same batteries than Cheerson CX-10. You could find it with no problem and are one of the cheapest.

Batteries. Following with battery topic, are not interchangeable but, in the moment you must change it (you will do it for sure) it’s than easy to remove 4 screw, old battery and solder the new one. Not more than 5 minutes.


Protectors. Propeller protectors are very weak and usually get trapped in curtains, furniture, etc. As easy to remove it cutting in the root. Very recommendable to remove it first, all rotors will be broken with or without crashes.




Lights position. Finally, as a personal opinion, a would prefer to switch lights position. I mean, it’s much common to find green leds in the front of the vehicles and red ones in the back.

Will update soon with new post, photos and reviews.

See you soon.

Thanks!


FreeDroneFlyersTeam.


Comments

  1. Great article! I love how you explained that Walkera drones are for those who like to find out what is "under the hood". For those who are interested in characteristics and features this amazing model has to offer, make sure you also check out this text http://mydronelab.com/reviews/walkera-tali-h500.html

    ReplyDelete

Post a Comment

Popular posts from this blog

ND filter. Preview

Going ahead with reviews we have finally received ND filter. It’s not tested yet but I would try to show you my very first lookup. ND filter As discussed in the previous post, it is an alternative complement to sports cameras, different from the UV filter. Remembering UV one, it doesn't affect the images or logs at all, but I have noticed it's very useful in protection performance. ND filter,  instead , set some slight changes to video records. Protection performance is the same as UV, but introducing some improvements, such as jelly effect narrowing, for example. As is known, jelly effect is the feeling of keeping the trembling in the video recordings. First lookup Contrast inbetween is very evident in first view after checking these filters (ND and UV), due ND filter present a smoked plastic cover while UV it’s totally transparent. ND filter (left) vs UV filter (right) Manufacturing instead it’s almost the same. Both filters are almost twins...

Racerstar BR2205. Maybe the best low-cost racing motors

Looking back, in previous post, we were discussing about another low-cost brushless motor with great cost-benefit, RCX1804. Following with this premise, we are going to annalize perhaps the next step to our quads. Obviously, RCX are great motors to begin with, but you will like to improve the time you get more experience flying. So, it's natural to look for powerful motors to get faster flights. Racerstar BR2205 2300kv Taking this into account, we are going to introduce you the BR2205.  Once they have been tested, we can conclude are awesome motors to going faster. Those racing motors allow to save a considerable amount money without renounce to have a good performance.  Same brand offer two diverse power options: 2300kv and 2600kv. First one are the most extended and my recommendation, being so much easier to find. In terms of prices you could find it around 38/40€ in Europe and 28/30€ in China. Each motor is delivered in it's own red ...

New challenges. Mini brushed quad. Coming soon.

Hello everyone. Free Drone Flyers Team just wants to post a short article to give you some approaches about the new challenges that are to come on the blog. We have minds on some new projects for the new year, even these two are currently starting. The first two, would be two quads mountings, based on spare parts, but both so different between them. First one will be a tiny FPV quad. It will be very useful in currently days, according the cold temperatures we are experiencing, which make us complicated to fly outside. Even more, it’s another way to practice to fly with FPV in a bounded environment, preventing injuries and big crashes. Will be based on Lantian 105 frame. To build it we would use new parts purchased on purpose to do it, but also with some spare parts previously got as spare parts of another previous quads, especially beginner ones used in first flights. Therefore, we would try to mount a tiny quad as cheap as possible, but also keeping ...